20" Bar & Chain Combo for Husqvarna 455 460 Rancher 3/8 .050 72DL Copiar título

Replace your worn chainsaw guide bar and chain together with this 20-inch aftermarket bar and chain combo for select Husqvarna chainsaws, including the 455 Rancher and 460 Rancher. The combo includes a 20" sprocket-nose guide bar and a matching 72-drive-link saw chain with 3/8" standard pitch and .050" gauge.

Designed for compatible chainsaws using the K095 Husqvarna small-mount bar configuration and a 3/8" drive sprocket.

Key Features

• Complete Bar & Chain Combo: Includes one 20" guide bar and one matching saw chain.
• 20-Inch Cutting Length: Suitable for compatible chainsaws equipped for a 20" bar.
• 3/8" Standard Pitch: Designed for saws using a matching 3/8" drive sprocket.
• .050" Gauge: Matching bar groove and chain drive-link thickness.
• 72 Drive Links: Chain length matched to the included guide bar.
• Sprocket-Nose Guide Bar: Replacement bar design for compatible chainsaw applications.
• Aftermarket Replacement: A convenient alternative to purchasing the guide bar and chain separately.

Compatible Husqvarna Chainsaws

Primary applications:

• Husqvarna 455 / 455 Rancher
• Husqvarna 460 / 460 Rancher

Additional Husqvarna model references:

• 51, 55, 55 Rancher, 57
• 254, 257, 257XP
• 261, 262, 262XP
• 357XPG
• 359E, 359E-Tech
• 362, 362XP
• 543XP, 543XPG
• 555
• 560XP, 560XPG

Fitment note: Additional models are historical Green Dade application references. Some may use different bar mounts, drive sprockets, or factory chain specifications. Confirm K095 bar-mount compatibility and the 3/8" drive system before ordering.

Additional Chainsaw Brand References

• Craftsman: CS5720
• EFCO: 156, 165
• Solo: 651, 651SP, 652
• Homelite: Super XL, Super EZ

These additional models are retained as historical application references, not guaranteed direct-fit applications. A matching 20" chain specification alone does not establish guide-bar mounting compatibility. Verify the complete bar mount, oiling arrangement, chain pitch, gauge, and drive-link count before ordering.

Product Specifications

• Product Type: Chainsaw Guide Bar and Chain Combo
• Guide Bar Length: 20" (50 cm nominal)
• Guide Bar Type: Sprocket Nose
• Chain Pitch: 3/8" Standard
• Chain Gauge: .050" (1.3 mm)
• Drive Links: 72
• Bar Mount: K095 / Husqvarna Small Mount
• Package Quantity: 1 Guide Bar + 1 Saw Chain

Package Includes

• 1 Replacement 20" Chainsaw Guide Bar
• 1 Matching 20" Saw Chain, 3/8" Pitch, .050" Gauge, 72 Drive Links

Important Fitment Information

Check your chainsaw before ordering. Husqvarna 455 Rancher and 460 Rancher saws may be equipped with different bar and chain configurations, including .325" pitch and .058" gauge systems.

This combo requires a compatible 3/8" drive sprocket and K095 bar mounting arrangement. It is not a direct replacement for a .325" pitch setup unless the required drive components have also been correctly matched.

Verify the bar-mount pattern, oiling holes, chain pitch, gauge, and drive-link count. The included chain is designed for the included bar; it may not fit another 20" bar with a different drive-link requirement.

Follow the chainsaw manufacturer's instructions for bar installation, chain tension, lubrication, and safe operation.